A X 3 6 4 S p e c i f i c a t i o n s

group · I

INPUT PANEL

SIGNAL DIAGRAM

S/N

WHITINSVILLE, MA USA

BI-AMP INPUT

LF MF/HF

N/C -- + -- +

CONNECT

JUMPERS

FOR PASSIVE

OPERATION

PASSIVE

INPUT

-- + -- + -- +

MANUFACTURED UNDER ONE OR MORE OF THE FOLLOWING U.S. PATENTS:

5,996,728; 6,009,182; 6,016,353; 6,094,495; 6,118,883

HORN PATTERN LABEL (factory installed horn orientation)

45

60

AX364

NOTES

TABULAR DATA

3-Way, Single-Amp (LF/MF/HF)

 

 

 

 

 

HF

DSP

 

 

 

EQ

AMP

XVR

MF

HPF

 

 

 

 

 

 

LF

3-Way, Bi-Amp (LF, MF/HF)

 

 

DSP

AMP

XVR

HF

EQ

 

 

 

 

 

DELAY

 

 

 

HPF/LPF

AMP

 

MF

 

 

 

LF

LEGEND

 

 

 

DSP: User-supplied Digital Signal Processor.

HPF: High Pass Filter for crossover or Recommended High Pass Filter.

LPF: Low Pass Filter for crossover.

LF/MF/HF: Low Frequency / Mid Frequency / High Frequency.

AMP: User-supplied Power Amplifier.

XVR: Passive LPFs, HPFs, and EQ integral to the loudspeaker.

1.Measurement/Data Processing Systems: Primary - FChart: proprietary EAW software; Secondary - Brüel & Kjær 2012.

2.Microphone Systems: Earthworks M30; Brüel & Kjær 4133

3.Measurements: Dual channel FFT; length: 32 768 samples; sample rate: 48 kHz; logarithmic sine wave sweep.

4.Measurement System Qualification (includes all uncertainties): SPL: accuracy +/-0.2 dB @ 1 kHz, precision +/-0.5 dB 20 Hz to 20 kHz, resolution 0.05 dB; Frequency: accuracy +/-1 %,

precision +/-0.1 Hz, resolution the larger of 1.5 Hz or 1/48 octave; Time: accuracy +/-10.4 µs, precision +/-0.5 µs, resolution 10.4 µs; Angular: accuracy +/-1°, precision +/-0.5°, resolution 0.5°.

5.Environment: Measurements time-widowed and processed to eliminate room effects, approximating an anechoic environment. Data processed as anechoic or fractional space, as noted.

6.Measurement Distance: 7.46 m. Acoustic responses represent complex summation of the subsystems at 20 m. SPLis referenced to other distances using the Inverse Square Law.

7.Volts: Measured rms value of the test signal.

8.Watts: Per audio industry practice, “loudspeaker watts” are calculated as voltage squared divided by rated nominal impedance. Thus, these are not True Watt units of energy as defined by International Standard.

9.SPL: (Sound Pressure Level) Equivalent to the average level of a signal referenced to 0 dB SPL = 20 microPascals.

10.Subsystem: This lists the transducer(s) and their acoustic loading for each passband. Sub = Subwoofer, LF = Low Frequency, MF = Mid Frequency, HF = High Frequency.

11.Operating Mode: User selectable configurations. Between system elements, a comma (,) = separate amplifier channels; a slash (/) = single amplifier channel. DSP = Digital Signal Processor.

IMPORTANT: To achieve the specified performance, the listed external signal processing must be used with EAW-provided settings.

12.Operating Range: Range where the processed Frequency Response stays within -10 dB SPL of the power averaged SPL within this range; measured on the geometric axis. Narrow band dips are excepted.

13.Nominal Beamwidth: Design angle for the -6 dB SPL points, referenced to 0 dB SPL as the highest level.

14.Axial Sensitivity: Power averaged SPL over the Operating Range with an input voltage that would produce 1 W at the nominal impedance; measured with no external processing on the geometric axis, referenced to 1 m.

15.Nominal Impedance: Selected 4, 8, or 16 ohm resistance such that the minimum impedance point is no more than 20% below this resistance over the Operating Range.

16.Accelerated Life Test: Maximum test input voltage applied with an EIA-426B defined spectrum; measured with recommended signal processing and Recommended Protection Filter.

17.Calculated Axial Output Limit: Highest average and peak SPLs possible during the Accelerated Life Test. The Peak SPL represents the 2:1 (6 dB) crest factor of the Life Test signal.

18.High Pass Filter: This helps protect the loudspeaker from excessive input signal levels at frequencies below the Operating Range.

GRAPHIC DATA

1.Resolution: To remove insignificant fine details, 1/12 octave cepstral smoothing was applied to acoustic frequency responses and 1/3 octave cepstral smoothing was applied to the beamwidth and impedance data. Other graphs are plotted using raw data.

2.Frequency Responses: Variation in acoustic output level with frequency for a constant input signal. Processed: normalized to 0 dB SPL. Unprocessed inputs: 2 V (4 ohm nominal impedance),

2.83V (8 ohm nominal impedance), or 4 V (16 ohm nominal impedance) referenced to a distance of 1 m.

3.Processor Response: The variation in output level with frequency for a constant input signal of 0.775 V = 0 dB reference.

4.Beamwidth: Average angle for each 1/3 octave frequency band where, starting from the rear of the loudspeaker, the output first reaches -6 dB SPL referenced to 0 dB SPL as the highest level. This method means the output may drop below -6 dB SPL within the beamwidth angle.

5.Impedance: Variation in impedance magnitude, in ohms, with frequency without regard to voltage/current phase. This means the impedance values may not

be used to calculate True Watts (see 9 above).

6.Polar Data: Horizontal and vertical polar responses for each 1/3 octave frequency band 100 Hz to 16 kHz or Operating Range.

Eastern Acoustic Works One Main Street Whitinsville, MA 01588 tel 800 992 5013 / 508 234 6158 fax 508 234 8251 www.eaw.com

EAW products are continually improved. All specifications are therefore subject to change without notice.

Part Number: RD0188 (C) AX364 November 2005

Page 6
Image 6
EAW AX364 specifications Input Panel Signal Diagram, + -- + -- +

AX364 specifications

The EAW AX364 is a high-performance, professional-grade loudspeaker designed for various live sound applications. Renowned for its exceptional audio quality and advanced engineering, the AX364 is a versatile solution suitable for concerts, events, and installations. Key to its appeal is its robust construction, ensuring durability and reliability in demanding environments.

One of the main features of the EAW AX364 is its three-way design, which includes a 12-inch woofer, a 6.5-inch midrange driver, and a dual 1-inch compression drivers. This configuration allows the AX364 to deliver a wide frequency response, capable of reproducing everything from deep bass tones to sparkling high frequencies. With a frequency response spanning 50 Hz to 20 kHz, the speaker provides an accurate and clear sound across the entire audio spectrum, ensuring every nuance of the performance is heard.

The AX364 employs advanced technologies that enhance its sound quality and versatility. One such technology is EAW’s proprietary Hydra technology, which optimizes the speaker’s dispersion characteristics, allowing for a wider coverage area. This feature is particularly beneficial for large venues where consistent audio quality is critical across all audience areas. Additionally, the speaker is equipped with EAW’s digital signal processing (DSP) capabilities, offering precise control over EQ, crossover settings, and time alignment. This ensures optimal performance tailored to specific acoustic environments.

Another notable characteristic of the AX364 is its lightweight and portable design, making it easy to transport and install. Weighing in at just under 50 pounds, the speaker is built with a rugged composite enclosure that minimizes weight without compromising durability. The enclosure design also aids in reducing unwanted resonances, providing a clearer sound.

Connectivity options on the AX364 include both speakOn and ¼-inch jacks, offering flexibility for various applications. The speaker also features integrated rigging points, facilitating quick and easy mounting options for installations.

In summary, the EAW AX364 loudspeaker is a powerful and versatile solution that brings together advanced technologies, an exceptional design, and robust construction. Its ability to deliver high-quality sound across a wide frequency range makes it an ideal choice for professional audio engineers and sound reinforcement applications. Whether for live performances or fixed installations, the AX364 stands out as a reliable and high-performing audio solution.