EAW MQ1364e specifications Features, Description, Application, Performance, Physical

FEATURES

•Dedicated horn loaded MF/HF array module

•10-in MF w/ Radial Phase Plug™; 2-in exit Neodymium HF

•60° x 40° beamwidth

•Vertically configured to create horizontal arrays

DESCRIPTION

A dedicated mid/high system in a vented trapezoidal enclo- sure. Includes a horn-loaded 10-in MF cone with Radial Phase Plug™ and a 2-in exit/3-in diaphragm Neodymium compres- sion driver. The MF and HF horns provide a nominal 60° x 40° beamwidth. An internal passive crossover with jumpers on the input panel allows user selection of either bi-amplified or passive operation. In either case digital signal processing is required to achieve specified performance. The enclosure features a comprehensive system of 3/8”-16 threaded sus- pension points.

APPLICATION

The MQ1364e employs a no-compromise design where the mid and high frequency horns are truly large enough to provide optimal pattern control throughout each passband. The horns feature a rigid but well-damped construction using wood veneer backed by structural foam. The MQ1364e has been designed to work with a complementary MQ1300 Series LF loudspeaker to create a full-range audio system, but may also be used without a LF complement for voice-only applications. The enclosure is vertically configured for arraying in horizon- tal rows. Horizontal arrays are typically used in venues, such as houses of worship, where the array must address wide, fan- shaped audiences.

Application Usage: Install
Houses of Worship	Auditoriums
Theatres	Arenas
Performing Arts Centers	Stadiums

PERFORMANCE

Frequency Response (1 W @ 1m)

±3 dB 250 Hz to 15 kHz -10 dB 200 Hz

Axial Sensitivity (dB SPL, 1 Watt @ 1m)

Passive 109

MF 109

HF 108

Impedance (Ohms)

Passive 8

MF 8

HF 8

Power Handling, AES Standard (Watts)

Passive 325

MF 400

HF 150

SPECIFICATIONS MQ1364e

Calculated Maximum Output (dB SPL)
Passive Peak	140
MF Peak	141
HF Peak	136
Passive Long Term	134
MF Long Term	135
HF Long Term	130
Nominal Coverage Angle/-6 dB points (degrees)
Horizontal	60
Vertical	40
Recommended High-Pass Frequency
24 dB/Octave	200 Hz

PHYSICAL

Configuration	Mid/High
Powering	Passive or Bi-amplified
MF Subsystem	1x 10-in horn-hoaded cone,
HF Subsystem	Radial Phase Plug™
	1x 2-in exit/3-in voice coil com-
	pression driver on constant
Enclosure Materials	directivity horn
	Exterior grade Baltic birch plywood
Finish	Wear resistant textured black paint
Connectors	Terminal barrier strip
Suspension Hardware	16x 3/8"-16 threaded mounting
	suspension points (4 each top,
Grille	bottom and sides)
	Powder coated perforated steel
Dimensions	inches	millimeters
Height	40.00	1016
Width (front)	32.00	813
Width (rear)	8.12	206
Depth	25.61	650
Trapezoid Angle	25° per side
Weights	pounds	kilograms
Net Weight	148	67.3
Shipping Weight	156	70.9

One Main Street, Whitinsville, MA 01588	508 234 6158	Toll Free 800 992 5013	FAX 508 234 8251	info@eaw. com	www. eaw. com
EAW products are continually improved. All specifications are therefore subject to change without notice.			MQ1364e/0002678/2 pp	April 2002	Printed in USA