EAW MQ1364e specifications Dimensional Drawing, Specifications

DIMENSIONAL DRAWING

(8.12)	A
L
C

11.91

SPECIFICATIONS MQ1364e

A & E SPECIFICATIONS

The 2-way mid/high loudspeaker shall incorporate a 10-in MF cone with Radial Phase Plug™, and a 2-in exit/3-in diaphragm HF compression driver. The MF and HF devices shall be loaded

25.61

13.00

12.16

23.28

50°

TOP

DIMENSIONS APPLY

TO TOP AND BOTTOM

5.00A

MQ1364e

on horns that provide a nominal 60° x 40° beamwidth. An internal passive crossover network shall offer either passive or bi-amplified operation, configurable via jumpers on the input panel.

System frequency response shall vary no more than 63 dB from

32.00

40.00

GRILLE PARTIALLY SHOWN

FRONT

6.37 13.15

5.00

36.10CL

	VIEW A-A	11.89
(1.95) DIMENSIONS APPLY		INPUT
	TO BOTH SIDES

4.00
	34.93
	19.75
C
L
BACK	2.54

250 Hz to 15 kHz measured on axis. When amplified using the internal passive crossover network, the loudspeaker shall pro- duce a sound pressure level of 109 dB SPL on axis at 1 meter with a power input of 1 watt, and shall be capable of produc- ing a peak output of 140 dB SPL on axis at 1 meter. It shall handle 325 watts of amplifier power (AES Standard) and shall have a nominal impedance of 8 ohms. When bi-amplified, the MF section shall produce a sound pressure level of 109 dB SPL on axis at 1 meter with a power input of 1 watt, and shall be capable of producing a peak output of 141 dB SPL on axis at

NOTES:

1. SYMBOL INDICATES MOUNTING POINT,

3/8-16 THREADED HOLE (PI ANGLE).

2. SYMBOL INDICATES NON LOAD BEARING MOUNTING POINT, 3/8-16 THREADED HOLE (PI ANGLE).

3. SYMBOL INDICATES CENTER OF BALANCE.

4.WEIGHT APPROX. 159 LBS.

5.SHIPPING WEIGHT APPROX. 176 LBS.

Manufacturing tolerances are +/- 0.13 and +/- 1°

1 meter. It shall handle 400 watts of amplifier power (AES Standard) and shall have a nominal impedance of 8 ohms. The HF section shall produce a sound pressure level of 108 dB SPL on axis at 1 meter with a power input of 1 watt, and shall be capable of producing a peak output of 136 dB SPL on axis at 1 meter. It shall handle 150 watts of amplifier power (AES Standard) and shall have a nominal impedance of 8 ohms.

The loudspeaker enclosure shall be trapezoidal in shape. It shall be constructed of exterior grade Baltic birch plywood and shall employ extensive internal bracing. It shall be finished in wear-resistant textured black paint. Input connectors shall be

aterminal strip. A total of 16x 3/8”-16 threaded mounting/suspension points (4 each top, bottom, and sides) shall be provided. The front of the loudspeaker shall be cov- ered with a powder coated perforated steel grille.

The 2-way mid/high loudspeaker shall be the EAW model MQ1364e.

One Main Street, Whitinsville, MA 01588	508 234 6158	Toll Free 800 992 5013	FAX 508 234 8251	info@eaw. com	www. eaw. com
EAW products are continually improved. All specifications are therefore subject to change without notice.			MQ1364e/0002678/2 pp	April 2002	Printed in USA