Playback from disc/Playback Feature
English
Video CD
(Formats 1.0, 1.1, 2.0)
Super Video CD
is a trademark of DVD Format/Logo Licensing Corporation.
Because of problems and errors that can occur during the creation of DVD and CD software and/or the manufacture of DVD and CD discs, Toshiba cannot assure that this DVD player will successfully play every disc bearing the DVD and CD logos. If you happen to experience any difficulty playing a DVD and/or CD disc on this DVD player, please contact Toshiba Customer Service.
For
EPlayback may start automatically. If not, press PLAY/
PAUSE
.
If a disc menu appears on the TV, see page 14 'Using the disc menu'.
If the parental control was activated for the inserted disc, you have to enter your
For more playback features, see pages 13 - 17.
Tips:
-Do not close the disc tray manually if the power is switched off.
This DVD player requires discs/recordings to meet certain technical standards in order to achieve optimal playback quality. There are many different types of recordable disc formats. Not all recordable discs will operate or produce optimal playback quality. The technical criteria set forth in this owner's manual are meant only as a guide.
You must obtain any required permission from copyright owners to download or use copyrighted content. Toshiba cannot and does not grant such permission.
Basic playback control
Unless otherwise stated, all operations described are based on Remote Control use.
Pausing playback
ADuring playback, press PLAY/PAUSE 
to pause playback and display a still picture.
Sound will be muted.
BTo resume normal playback, press PLAY/PAUSE
again.
Supported Formats
JPEG/Pictures
Tips:
–Maximum 100 sessions for CD and 10 multi border for DVD are supported.
–For
–For DVD+R and DVD+RW multi border, both finalized and unfinalized disc cannot be supported.
Skipping chapter/track
Press PREV 
/ NEXT 
to go to the previous or next chapter/track during playback.
When PREV 
is pressed after the 5 seconds of playback, playback will start from the beginning of the current chapter/track. If you press the button within the 5 seconds, playback will start from the beginning of the preceding chapter/track.
Press DISPLAY to display the disc information for title/chapter/track.
Use Number buttons to enter valid chapter / track number directly. For the track/chapter numbers which are greater than ＂9＂, use ＂+10＂ button. Each press increases the number by 10. Then press the second digit of track/Chapter number.
The playback skips to the selected chapter / track.
Tip:
-For VCD 2.0 / SVCD discs, accessing tracks using number buttons is not possible if the PBC mode is turned on.
Stopping playback
ybacStarting disc playback
ATurn on the TV and select the video input connected to the DVD player.
BPress 2ON/STANDBY to turn on the DVD player.
CPress OPEN/CLOSE to open the disc tray.
DPlace a disc onto the disc tray with the label facing up, then press OPEN/CLOSE.
ADuring playback, press STOP .
The DVD player memorises the stopped point. Press PLAY/ PAUSE 
to resume playback from the location where you stopped playback.
If you press STOP again, the DVD player will cancel the resume function.
Tips:
Helpful hint: Some discs cannot be played on this DVD player due to the configuration and characteristics of the disc, or due to the condition of recording and authorizing software.
13
