14.Rigging Precautions: When mounting or suspending EAW Commercial loudspeaker enclosures, it is essential that load ratings, rigging techniques, and special safety considerations be appropriate for the installation. Use only the mounting/rigging points on the loudspeaker enclosure intended for this purpose. The user must determine the load requirements, dynamic loading, and any other contributing factors affecting the loudspeaker installation. The user must determine the proper design factor for specific applications and the required load rating of the connection to structure. Comply with all applicable federal, state, and local regulations.
EAW Commercial strongly recommends the following rigging system practices:
•Documentation: Thoroughly document the mounting/rigging design with detailed drawings and parts lists.
•Analysis: Have a licensed structural engineer or other qualified professional review and approve the mounting/rigging design before its implementation.
•Installation: Use personnel experienced and qualified for mounting/rigging loudspeakers in accordance with and in compliance with all federal, state and local regulations.
DANGER: Loudspeakers should be mounted or suspended only by persons with knowledge of the proper hardware and rigging techniques. When stacking or
loudspeakers, be sure that they are stabilized and secured from falling over or being accidentally pushed over. Failure to follow these precautions may result in damage to the equipment, personal injury, or death.
TABLE OF CONTENTS |
|
1. SAFETY INSTRUCTIONS | 2 |
2. INTRODUCTION | 4 |
3. INSTALLATION | 5 |
4. CONNECTIONS | 6 |
5. OPERATION | 8 |
6. SPECIFICATIONS | 9 |
Dimensions | 10 |
Performance Graphs | 11 |
7. TROUBLESHOOTING | 12 |
8. SERVICE and MAINTENANCE | 13 |
9. WARRANTY | 15 |
VRS12 and VRS18 – 3
