1. SAFETY INSTRUCTIONS

1.Read these instructions.

2.Keep these instructions.

3.Heed all warnings.

4.Follow all instructions.

5.Do not use this apparatus near water.

6.Clean only with a dry cloth.

The exclamation point within an equilateral triangle is intended to

alert the user of the presence of important operating and maintenance (servicing) instructions in the literature accompanying the apparatus.

7.Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.

8.Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.

9.Only use attachments/accessories specified by the manufacturer.

10.Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.

11.The entire sound system must be designed in compliance with the current standards and laws regarding electrical systems.

12.When installing and using this apparatus, keep in mind the technical specifications indicated in the dedicated section of the manual.

13.Exposure to high sound levels can cause permanent hearing loss. The sound pressure level which leads to hearing loss varies considerably from one person to another, and depends on the duration of exposure. The U.S. Government’s Occupational Safety and Health Administration (OSHA) has established the maximum sound pressure levels that can be with stood without causing damage, which are shown in the table below. According to the OSHA regulations, any exposure over the maximum limits indicated in the table can reduce the hearing capacity of a person. To prevent potentially dangerous exposure to high sound pressure levels, anyone subjected to such levels must use suitable protection. When a EAW Commercial product capable of producing high sound levels is being used, it is therefore necessary to wear ear plugs or protective earphones when the limits shown in the table are exceeded. Consult the specifications provided in the instruction manual to know the maximum sound pressure (SPL) the loudspeaker is capable of producing.

WARNING! This equipment has been designed to be installed

by qualified professionals only! There are many factors to be considered when installing professional sound reinforcement systems, including mechanical and electrical considerations, as well as acoustic coverage and performance. EAW Commercial strongly recommends that this equipment be installed only by a professional sound installer or contractor.

2 – VRS12 and VRS18

Duration per

Sound level

Typical example

day (hours)

(dBA)

 

 

 

 

8

90

Duo in a small club

692

4

95

Subway train

397

2

100

Very loud classical music

1.5102

1

105

Locomotive at 50 feet

0.5110

0.25 or less

115

Loudest parts at a rock concert

Part No. 0012179 Rev.A 09/2004

© 2004 LOUD Technologies Inc. All Rights Reserved.

Page 2
Image 2
EAW VRS12 VRS18 instruction manual Safety Instructions