2

INSTRUCTIONS:

1.Remove original head as described in your trimmer Operator’s Manual.

2A. For machines with extended threaded shafts (A) select triangular adaptor (C) that most closely matches diameter of the threaded shaft. Select the correct nut (D) thread size and tightening direction. Refer to Application Chart on page 5 and bag content list below to select correct hardware for your specific model.

2B. For machines with threaded holes (B) select the correct size bolt (E) that threads into the gear box. Then select triangular adaptor (C) that most closely matches the diameter of the bolt.

2C. For Stihl FS straight shaft models and Husqvarna 300 Series, mount Rapid LoaderTM head (G) directly over one inch shoulder on -bottom of gear box. Place nylon spacer (J), and nut (D) into center of Rapid LoaderTM head (G) and tighten securely.

Disregard steps 3~6.

3.

Place the large washer (F) between the bottom of the gear box and the trimmer head (G).

4.

Place the black triangular adaptor (C) into the center recess of the Rapid LoaderTM head (G) and

 

align the triangle boss with triangle opening in recess.

5.

Thread the selected nut (D) or bolt (E) into the center of the Rapid LoaderTM head (G) and tighten

 

securely.

6.

Insert pre-cut 204 mm (8 in.) length of nylon cutting line (recommended sizes 2.4 mm [.095 in.]

B

A

F

G

CJ

to 3.9 mm [.155 in.]) through outside openings of trimmer head. Minimum of 153mm (6 in.) of

line should extend from each opening. 3.9mm [.155 in.] line not recommended for trimmers

under 26cc.

NOTE

Insertcuttinglineendstocenterofheadrecesstoinsureeasyremovalofusedlines.

Trimmer Line Diameter Usage

All curved Shaft Line Trimmers Use Line Diameter .080” To .095”

Line Trimmers Engine Size 15cc. To 24CC. Use Line Diameter .095” To .105” Line Trimmers Engine Size 25cc. & UP Use Line Diameter .095” To .155”

D

E

21560057(REF#RL-35)ADAPTERSOLDSEPARATELYFORSTIHLFSCURVEDSHAFTTRIMMERS.

ContactyourECHODealertoorderRapidLoaderTMpre-cutreplacementline.

ORANGEBAGCONTENTLIST

REF#

COLOR

DESCRIPTION

RL52

SILVER

10mmX1.25X22LEFTHANDBOLT

RL53

GOLD

8mmX1.25X22LEFTHANDBOLT

RL70

BLUE

8mmX1.25LEFTHANDNUT

RL72

BLACK

10mmX1.00LEFTHANDNUT

RL74

GOLD

10mmX1.25LEFTHANDNUT

RL77

SILVER

3/8-24LEFTHANDNUT

RL78

RED(InGreeenBag)

3/8-24RIGHTHANDNUT

RL42

SILVER

3/8X1.5IN.LARGEFENDERWASHER

RL45

SILVER

3/8X1.25IN.SMALLFENDERWASHER

GREENBAGCONTENTLIST

Tobeusedwiththreepieceadapter(REF#RL-30).

COLOR

DESCRIPTION

GOLD

8mmX1.25RIGHTHANDNUT

SILVER

5/16-20X1RIGHTHANDBOLT

SILVER

1/4-20X1/2RIGHTHANDBOLT

SILVER

5/16-24RIGHTHANDNUT

SILVER

3/8FLATWASHER

IMPORTANT

Donotforceboltsornutsontotrimmershaft,otherwisedamagetotrimmerthreadsmayoccur.