PAS ARTICULATING HEDGE CLIPPER ATTACHMENT 15 OPERATOR'S MANUAL

STORAGE

IMPORTANT

Always store and transport hedge clippers in a stable position. Support gear case and cutting blades to prevent excessive flexing which may cause damage to the cutting attachment. Always install blade cover when transporting or storing unit.

1.Clean and lubricate cutting blades and gear case.

2.Sharpen cutting blades as required.

3.Apply a light coating of clean 20W engine oil along entire length of blades and on blade bolts.

4.Install blade cover onto hedge clipper cutting blades.

5.Store hedge clipper attachment in a dry, dust free place out of the reach of children, using supplied storage hook.

Storage Hook Installation

1.Insert small end of hook into locating hole on attachment shaft.

2.Slide plastic cap onto end of attachment shaft.

SPECIFICATIONS

PAS Articulating Hedge Clipper Attachment

Length -------------------------------------------------------

1016mm(40.0in.)

Attachment Width -----------------------------------------

132mm(5.2in.)

Height -------------------------------------------------------

127mm(5.0in.)

Weight ------------------------------------------------------

2.76kg.(6.08lb.)

Gear Case Ratio --------------------------------------------

4.072:1

Cutter --------------------------------------------------------

Double Reciprocating Blade - Double Edge

Effective Length -----------------------------------------

464mm(18.3in.)

Pitch -------------------------------------------------------

35mm(1.4in.)

MaximumDiameterCut

 

Soft Material ----------------------------------------------

25.4mm(1in.)

Woody Material ------------------------------------------

13mm(1/2in.)