14
BLADE ADJUSTMENT
Level 2.
Tools required: (2) 10 mm Sockets & Extensions
Parts required: None
WARNING
Hedge clipper blades are very sharp. Touching them may lead to severe personal injury. Use a socket and extension when adjusting blade bolts or blade locknuts in order to keep hands at a safe distance from sharp blades.
1.Tighten blade bolts (A) until snug, then loosen blade bolts 1/2 turn.
2.Hold blade bolts (A) from turning using 10 mm socket & Exten- sion, and tighten blade lock nuts (B) with other 10 mm Socket & Extension.
NOTE
Locking ability of Hedge Clipper blade lock nuts will diminish each time they are removed. Replace if turning resistance is not felt when installing locknuts.
B
A