Echo SHARPENING BLADES, PAS ARTICULATING HEDGE CLIPPER ATTACHMENT 13 OPERATOR'S MANUAL

PAS ARTICULATING HEDGE CLIPPER ATTACHMENT 13 OPERATOR'S MANUAL

SHARPENING BLADES

Level3.

Tools required: Flat file, screwdriver

Parts required: None

WARNING

Hedge Clipper Blades are very sharp. Wear gloves to protect hands.

1.Disconnect spark plug wire from spark plug.

2.Slide blades to allow file clearance using slots (A) on bottom of blades. Do not pry against cutting edges.

3.Follow the original shape, and file each cutting edge carefully to avoid damage to adjacent teeth. Maintain 6 mm (.25 in.) radius at base of each tooth.

IMPORTANT

If a power grinder is used, DO NOT allow blade to over heat.

4.Lubricate blades. See "Lubrication."

5.Connect spark plug wire.

AA

6mm (.25 in.) Radius

45º