6
EQUIPMENT
WARNING
Use only ECHO approved attachments. Serious injury may result from the use of a non approved attachment combination. Read and comply with all safety instructions listed in this manual and safety manual. ECHO, INC. will not be responsible for the failure of cutting devices or accessories which have not been tested and approved by ECHO for use with this unit.
•Check unit for loose/missing nuts, bolts and screws. Tighten and/or replace as needed.
•Never adjust blades when the engine is operating.
•Inspect hand guard for damage. Replace if damaged or missing.
•Check that the blade assembly is firmly attached and in safe operating condition. Dull, loose or damaged blades should not be used.
WARNING
Moving parts can amputate fingers or cause severe injuries. Keep hands, clothing and loose objects away from all openings.
•ALWAYS stop engine, disconnect spark plug, and make sure all moving parts have come to a complete stop before removing obstructions, clearing debris, or servicing unit.
•DO NOT start or operate unit unless all guards and protective covers are properly assembled to unit.
•NEVER reach into any opening while the engine is running. Moving parts may not be visible through openings.
DESCRIPTION
Locate these safety decals on your unit. Make sure the decals are legible and that you understand and follow the instructions on them. If a decal cannot be read, a new one can be ordered from your ECHO Dealer. See PARTS ORDER-
ING instructions for specific information. | 3 |
Shaft Decal
P/N X505000531
8
4
52
P/N 89016012360
1
6
7
P/N 89017854331