Echo CS-310 instruction manual Preparation For Use, Tip Guard To Bar Instructions, Description

CS-310 DESCRIPTION

Preparation For Use

Saw Chain is sharp! Always wear gloves when handling assembly, otherwise serious personal injury may result.

Note: The machine may be delivered with guide bar, tip guard, and saw chain separated. Install guide bar, tip guard, and saw chain as follows.

Tip Guard To Bar Instructions

Tool Needed: Two 11 mm (7/16 in.) Wrenches. For saws with Tip

Guard P/N 2894901 and Symmetrical or Asymmetrical Low-Kick type (Double Guard) guide bars.

1.Install bolt (A) in rear hole (B) of tip guard and through front hole (C) in guide bar.

2.IMPORTANT: Dimple (D) in tip guard must engage recess (E) in guide bar.

3.Securely tighten nut (F) and bolt (A).

Guide Bar And Saw Chain-Install/remove

1.Remove air cleaner cover and disconnect spark plug lead.

2.Move chain brake lever (G) (Front hand guard) fully rearward to unlock chain brake.

For more information scan this QR code.

A

D

B

E

C

F

For more information scan this QR code.

3.Remove sprocket guard nuts (H) and remove sprocket guard

(K).

4.Remove guide bar and saw chain if necessary.

Note: See “MAINTENANCE AND CARE” instructions for guide bar, sprocket, and saw chain maintenance.

G

K

H

X7503270007 15

© 08/2013 ECHO Inc.