CS-310

SAFETY

 

 

Correct Use Of Chain Brake

Chain Brake Operation

Set the lever in the unlocked position before starting to cut.

If the brake is tripped by kickback reaction, the chain will stop immediately. Release the throttle to avoid possible damage to the engine or clutch.

Do not attempt to operate the engine with the brake locked.

Testing The Brake

Start the engine on a solid level surface and run at a fast idle until warm.

Hold the saw firmly by the handles and accelerate the engine to a fast idle.

Slowly operate the chain brake lever while holding the saw firmly on the ground. When the brake lever trips, the chain should stop. Immediately release the throttle trigger.

Locked

Unlocked

Do not allow the saw to tip forward in order to avoid damage to the chain.

If the chain does not stop immediately, return the saw to your authorized ECHO dealer for repair.

Note:

For practice, while cutting a small tree, push the lever forward to lock the brake.

Confirm that the brake works properly before each use.

If the chain brake is clogged with wood chips, function of the brake may deteriorate. Always keep the device clean.

Do not increase engine RPM's while the chain brake is locked.

The installation of a chain brake may be mandatory by law or as stipulated by insurance regulations in your area of operation. You should inquire through local government offices, your employer or your local dealer to ensure that your chain saw conforms to the required safety standard.

ECHO chain brakes have been designed and tested to comply with international safety standards as follows.

USA: ANSI Standard B175.1 Safety Requirement for chain saws

ANSI Standard B175.1 stipulates that the brake shall stop the chain 0.12 seconds at an engine speed of 13,500 r/min. It is the responsibility of the owner/operator to ensure that the brake is serviced, adjusted and tested strictly in accordance with the instructions as detailed here in order to ensure that the brake performance is maintained in compliance with the Standard B175.1.

X7503270007

5

© 08/2013 ECHO Inc.

Page 5
Image 5
Echo CS-310 instruction manual Correct Use Of Chain Brake, Chain Brake Operation, Testing The Brake

CS-310 specifications

The Echo CS-310 is a lightweight, highly efficient chainsaw designed for homeowners and light-duty professionals who require portability and reliability. This model stands out in the market due to its combination of performance, ease of use, and innovative features, making it an ideal choice for various cutting tasks.

One of the standout features of the Echo CS-310 is its powerful 30.5cc engine. This engine is designed to deliver exceptional performance while maintaining fuel efficiency, making it suitable for extended use in garden and yard maintenance. With a maximum power output of 1.3 horsepower, it provides ample power for cutting through branches, logs, and firewood with ease.

The engine incorporates a high-efficiency, two-stroke design that not only optimizes fuel consumption but also minimizes harmful emissions. This eco-friendly approach ensures that the Echo CS-310 meets stringent environmental standards while still delivering outstanding cutting capabilities. The chainsaw's easy starting system is another plus, as it features a unique primer bulb and a decompression valve that simplifies the starting process, allowing users to get to work quickly and without frustration.

The lightweight design of the CS-310, weighing in at just around 8.8 lbs, makes it highly maneuverable. This is essential for users who may need to navigate through tight spaces or work overhead for extended periods. Coupled with an ergonomic handle, the chainsaw provides a comfortable grip that reduces fatigue during use, making long sessions less taxing on the operator.

Equipped with a 14-inch bar and chain, the Echo CS-310 strikes a perfect balance between cutting performance and usability. The chain is designed for optimal cutting speed and durability, ensuring reliable operation across various materials. Additionally, the tool-less chain tensioning system allows users to easily adjust the chain tension without the need for any tools, enhancing convenience between cuts.

Safety features are also a focal point of the Echo CS-310, incorporating a chain brake that automatically stops the chain in case of kickback, reducing the risk of accidents during operation. The chainsaw's rear-handle design provides added stability and control, further improving user safety.

In conclusion, the Echo CS-310 chainsaw offers an exceptional blend of lightweight design, powerful performance, and user-friendly features, making it an excellent choice for both casual users and those tackling regular outdoor chores. Whether trimming trees or cutting firewood, this model delivers reliability and efficiency, satisfying diverse cutting needs while emphasizing safety and comfort.