Manuals / Echo / Lawn and Garden / Chainsaw

Echo CS-310 instruction manual Carburetor Adjustment, Engine Break-In

Models: CS-310

1 44
Download 44 pages 59.51 Kb
Page 29
Image 29

CS-310

 

MAINTENANCE

 

 

 

 

 

 

 

 

Carburetor Adjustment

 

T

Every unit is run at the factory and the carburetor is set in

 

 

 

compliance with Emission Regulations. In addition, the

 

 

 

carburetor is equipped with “H” (High Speed) and “L” (Low

 

H

Speed) needle adjustment limiters that prevent settings

L

outside acceptable limits.

 

 

 

 

 

Engine Break-In

New engines must be operated a minimum duration of two tanks of fuel break-in before carburetor adjustments can be made. During the break-in period your engine performance

will increase and exhaust emissions will stabilize. Idle speed can be adjusted as required.

High Altitude Operation

This engine has been factory adjusted to maintain satisfactory starting, emission, and durability performance up to 1,100 feet above sea level (ASL) (96.0 kPa). To maintain proper engine operation and emission compliance above 1,100 feet ASL the carburetor may need to be adjusted by an authorized ECHO service dealer.

If the engine is adjusted for operation above 1,100 feet ASL, the carburetor must be re-adjusted when operating the engine below 1,100 feet ASL, otherwise severe engine damage may result.

1.Before adjusting carburetor clean or replace air filter and muffler “Spark Arrestor Screen”.

2.Make sure the bar and chain are properly adjusted.

3.Start engine and run several minutes to bring to operating temperature. Flash choke twice during warm-up to clear any air from the fuel system.

4.Stop engine. Turn “H” speed needle counterclockwise (CCW) to stop. Turn “L” speed needle midway between full clockwise (CW) stop and CCW stop.

5.Idle Speed Adjustment:

•Start engine, turn “Idle” speed adjustment screw “T” CW until the saw chain begins to move, then turn screw out CCW until the saw chain stops moving. Turn screw out, CCW, an additional 1/4 turn.

When carburetor adjustment is completed, the saw chain should not move at idle, otherwise serious personal injury may result.

6.Accelerate to full throttle for 2 - 3 seconds to clear any excess fuel in the engine, then return to idle. Accelerate engine to full throttle to check for smooth transition from idle to high speed. If engine hesitates turn “L” needle CCW 1/8 turn and repeat acceleration. Continue adjustment until smooth acceleration results.

7.Check idle speed and reset if necessary as described in item 5. If a tachometer is available idle speed should be set to value listed on technical data page.

When starting, idling adjustment speed should be adjusted to prevent the saw chain from moving. When you experience trouble with the carburetor, contact your dealer.

X7503270007

29

© 08/2013 ECHO Inc.

Page 28 Page 30
Page 29
Image 29
Echo CS-310 instruction manual Carburetor Adjustment, Engine Break-In
Page 28 Page 30

CS-310 specifications

The Echo CS-310 is a lightweight, highly efficient chainsaw designed for homeowners and light-duty professionals who require portability and reliability. This model stands out in the market due to its combination of performance, ease of use, and innovative features, making it an ideal choice for various cutting tasks.

One of the standout features of the Echo CS-310 is its powerful 30.5cc engine. This engine is designed to deliver exceptional performance while maintaining fuel efficiency, making it suitable for extended use in garden and yard maintenance. With a maximum power output of 1.3 horsepower, it provides ample power for cutting through branches, logs, and firewood with ease.

The engine incorporates a high-efficiency, two-stroke design that not only optimizes fuel consumption but also minimizes harmful emissions. This eco-friendly approach ensures that the Echo CS-310 meets stringent environmental standards while still delivering outstanding cutting capabilities. The chainsaw's easy starting system is another plus, as it features a unique primer bulb and a decompression valve that simplifies the starting process, allowing users to get to work quickly and without frustration.

The lightweight design of the CS-310, weighing in at just around 8.8 lbs, makes it highly maneuverable. This is essential for users who may need to navigate through tight spaces or work overhead for extended periods. Coupled with an ergonomic handle, the chainsaw provides a comfortable grip that reduces fatigue during use, making long sessions less taxing on the operator.

Equipped with a 14-inch bar and chain, the Echo CS-310 strikes a perfect balance between cutting performance and usability. The chain is designed for optimal cutting speed and durability, ensuring reliable operation across various materials. Additionally, the tool-less chain tensioning system allows users to easily adjust the chain tension without the need for any tools, enhancing convenience between cuts.

Safety features are also a focal point of the Echo CS-310, incorporating a chain brake that automatically stops the chain in case of kickback, reducing the risk of accidents during operation. The chainsaw's rear-handle design provides added stability and control, further improving user safety.

In conclusion, the Echo CS-310 chainsaw offers an exceptional blend of lightweight design, powerful performance, and user-friendly features, making it an excellent choice for both casual users and those tackling regular outdoor chores. Whether trimming trees or cutting firewood, this model delivers reliability and efficiency, satisfying diverse cutting needs while emphasizing safety and comfort.