Echo CS-500P instruction manual Automatic Chain Brake, Winter Operation

Models: CS-500P

1 36
Download 36 pages 24.51 Kb
Page 23
Image 23
End of the guide bar may be placed at the height of about 35 cm (14 in.).

End of the guide bar may be placed at the height of about 35 cm (14 in.).

35 cm

(14 in.)

Rear handle should be gripped lightly with the right hand.

AUTOMATIC CHAIN BRAKE

Kickback produced from the tip of the guide bar will trip the automatic chain brake. To make sure that the automatic chain brake operates properly, follow these steps:

1.Stop the engine.

2.Hold the saw with the guide bar approximately 35 cm (14 in.) above a wooden surface. Right hand should hold the rear handle, and left hand should hold the front handle.

3.Release the front handle and drop the end of the guide bar against the wooden surface.

4.The impact should lock the chain brake.

IMPORTANT

When checking the operation of the automatic chain brake, use a soft surface substance like wood to provide the impact so the chain is not damaged.

Air shutter

Warm weather position

(sun mark)

Air shutter

Cold weather position

(snowman mark)

WINTER OPERATION

Use the air shutter to prevent carburetor troubles in winter.

Pull the choke knob and remove the air cleaner cover and the air filter.

Pull out the air shutter and insert it with the snowman mark facing up.

NOTE

For operation at normal temperature, return the air shutter to its original position (with the sun mark facing up). (5°C, 41°F)

It causes over heating of the engine.

21

CS-500P

Page 23
Image 23
Echo CS-500P instruction manual Automatic Chain Brake, Winter Operation