CHAIN AND GUIDE BAR COMBINATION
The following combinations are recommended for model
Guide Bar |
| Saw chain |
| |
Length mm (in.) | Part No. | Pitch mm (in.) | Part No. | Links |
406 (16) | 16F0LD3366 | 8.26 (0.325) | 20LPX66CQ, 20BPX66CQ | 66 |
457 (18) | 18F0LD3372 | 8.26 (0.325) | 20LPX72CQ, 20BPX72CQ | 72 |
508 (20) | 20F0LD3378 | 8.26 (0.325) | 20LPX78CQ, 20BPX78CQ | 78 |
|
|
|
|
|
GUIDE BAR
The following guide bars may be considered to have equivalent kickback energy.
• Sprocket nose guide bars of the same length and nose radius, same pitch and having the same number of teeth.
• Hard nose guide bars of the same length and nose radius as a sprocket nose bar.
SAW CHAIN
CAUTION
Do not use replacement saw chain unless it has been designated as meeting the ANSI B175.1 - 2000 kickback performance requirements, when tested on the representative sample of chain saws below 3.8 c.i.d. specified in ANSI B175.1 - 2000.
NOTE
LOW KICKBACK SAW CHAIN meets the kickback performance requirements of ANSI B175.1 - 2000 (safety requirements for gasoline- powered chain saws).
22 |