NOMENCLATURE HAVE PARTS

1.Instruction manual - Included with unit. Read before operation and keep for future reference to learn proper, safe operating techniques.

2.Installation and use KICK GUARD - Describe how to install the kick guard and operate the saw with kick guard.

3.Safety manual - Describe operating and safety instructions for this chain saw.

4.Front hand guard - Guard between the front handle and the saw chain for protecting the hand from injuries and aiding in control of the chain saw if the hand slips off the handle. This guard is used to activate the chain brake which is to stop the saw chain rotation.

5.Air cleaner cover - Covers air filter.

6.Rear handle (for the right hand) - Support handle located towards the rear of the engine housing.

7.Choke control knob - Device for enriching the fuel/air mixture in the carburettor to aid cold starting.

8.Rear hand guard - Extension on the lower part of the rear handle for protecting the hand from the chain if it breaks or degrooves.

9.Clutch cover - Protective cover to the guide bar, saw chain, clutch and sprocket when the chain saw in use.

10.Chain catcher - A projection designed to reduce the risk of the operator’s right hand from being hit by a chain which has broken or derailed from the guide ber during cutting.

11.Guide bar - The part that supports and guide the saw chain.

12.Bar tip guard - Anti-kickback device attached on the bar nose.

13.Saw chain - Chain, serving as a cutting tool.

14.Spiked bumper - Device, fitted in front of the guide bar mounting point, acting as a pivot when in contact with a tree or log.

15.Front handle ( for the left hand ) - Support handle located at the front of the engine housing.

16.Oil tank cap - For closing the oil tank.

17.Fuel tank cap - For closing the fuel tank.

18.Throttle trigger - Device activated by the operator’s finger, for controlling the engine speed.

19.Throttle trigger lockout - A safety lever which must be depressed before the throttle trigger can be activated in order to prevents the accidental operation of the throttle trigger.

20.Ignition switch - Device for connecting and disconnecting the ignition system and thus allowing the engine to be started or stopped.

21.Starter handle - Pull handle slowly until starter engages then quickly and firmly. When engine starts, return handle slowly.

DO NOT let handle snap back or damage to unit will occur.

5