18

1.Remove spark plug lead (A).

2.Remove air filter cover (B).

3.Remove one (1) muffler cover screw and muffler cover (C).

4.Remove two (2) screw and engine cover (D).

IMPORTANT

DO NOT use a metal scraper to remove dirt from the cylinder fins.

5.Use brush to remove dirt from the cylinder fins.

6.Remove grass and leaves from the grid between the recoil starter and fuel tank.

7.Assemble components in reverse order.

A

B

C

D

EXHAUST SYSTEM

Spark Arrestor Screen

Level2.

Tools Required: Cross Head Screwdriver, Soft Metal Brush, 4 mm Hex Wrench

Parts Required: Spark Arrestor Screen, Gasket

1.Remove spark plug lead.

2.Remove one (1) muffler cover screw and muffler cover.

3.Place piston at Top Dead Center (TDC) to prevent carbon/dirt from entering cylinder.

4.Remove spark arrestor screen cover (A), gaskets (B), and screen

(C) from mufflerbody.

5.Clean carbon deposits from muffler components.

6.Replace screen if it is cracked, plugged or has holes burned through.

7.Assemble components in reverse order.

C

B

A