GRASS TRIMMER

OPERATOR'S MANUAL 21

LUBRICATION

Level1.

Tools Required: 8 mm Open-end wrench, screwdriver, clean rag

Parts Required: ECHO® LUBETM 8oz.(P/N91014)orLithiumBase Grease

1.Remove plastic shield.

2.Loosen bearing housing locating screw (A), at the top of the housing, remove mounting screw (B).

3.Pull the flexible drive shaft (C) from the housing, wipe clean and re- coat with a thin coating 1/2 oz. (15 ml) of grease.

4.Slide the flexible drive shaft back in the drive housing being careful not to get dirt on the flexible drive shaft.

B

A

C

5.Install the bearing housing and shield.