HEDGE CLIPPER 15

OPERATOR'S MANUAL

EQUIPMENT CHECK

Before operation a complete check of the unit must be performed;

•Check unit for loose/missing nuts, bolts and screws. Tighten and/or replace as needed.

•Inspect fuel lines, tank and area around carburetor for fuel leaks. DO NOT operate unit if leaks are found.

• Never adjust blades when the engine is operating.

•Inspect hand guard for damage. Replace if damaged or missing.

•Check that the blade assembly is firmly attached and in safe operating condition. Dull, loose or damaged blades should not be used.

DETERMINE OPERATION AREA

•Before starting the unit, equip yourself and fellow workers in the 4.5 m (15 ft.) safety zone with the required protective equipment and clothing.

•Review the area to be trimmed. Look for hazards that could contribute to unsafe conditions.

•Spectators, children and animals must be prevented from coming nearer than 4.5 m (15 Ft.) while the Hedge Clipper is in use.