Hedge Clipper 23 Operator's Manual

1.Move stop switch to stop position.

2.Disconnect spark plug wire from spark plug.

3.Brush loose debris from blade and coat both sides of blade with the 50-50 cleaning mixture.

4.Allow cleaning mixture to soften the remaining gummy resi- due then wipe it from the blade.

5.Apply clean oil to the entire length of the blade. Be certain the blade bolts are lubricated.

6.Wipe excess oil from the blade before putting the unit back in service.

Gear Box Assembly

Level 1.

Tools required: Grease Gun, Clean rag

Parts required: POWER BLENDXTM 14 oz. (P/N 91015) or Lithium Based Grease.

1.Clean dirt from grease fitting (A).

2.Apply 1-2 pumps of grease into fitting. DO NOT force grease. Too much pressure will force grease past seals and cause dam- age.

3.Wipe excess grease from around grease fitting.

sharpening blades

Level 2.

Tools required: 8 mm Socket & Extension, Flat file

Parts required: None

warning

A

Hedge Clipper blades are very sharp. Touching them may lead to severe personal injury. Avoid touching blades whenever possible, and always wear gloves to protect hands.