Hedge Clipper | 9 |
Operator's Manual |
Contents
After opening the carton, check for damage. Immediately notify your retailer or ECHO Dealer of damaged or missing parts. Use the contents list to check for missing parts.
1 - Hedge Clipper Assembly
1 - Operator’s Manual
1 - Safety Manual
1 - Warranty Registration Card
1 - Blade Cover
Hedge Clipper
Operator's Manual
M O D E L | |
|
WARNING
| Readrulesforsafeoperationandallinstructionscarefully. ECHOprovidesthis |
| Operator's Manual and a Safety Manual. Both must be read and understood for |
| proper and safe operation. |
X7502255300 | X750010190 |
xx/07 |
Assembly
Note
For normal cutting, Echo strongly recommends the blade stiffener be installed. In extreme conditions, such as commercial cutting, or when cutting thick and/or dense branches, efficiency may be increased by trimming without the blade stiffener.
Tools required: 8 mm Socket & Extension, 4 mm Hex Wrench
Parts Required: Blade Stiffener, Flange Locknuts
WARNING
Hedge Clipper blades are very sharp. Touching them may lead to
severe personal injury. Avoid touching blades whenever possible,
and always wear gloves to protect hands.