4
Symbol form/shape | Symbol | Symbol form/shape | Symbol | ||
description/application | description/application | ||||
|
|
|
|
|
|
| Read and understand |
|
|
| Fuel and oil mixture |
| owners manual. |
|
|
|
|
|
|
|
|
|
|
| Wear eyes, ears and |
|
|
| Finger Severing |
| head protection |
|
|
| |
|
|
|
|
|
|
|
|
|
|
| Hot |
| Emergency stop |
|
|
| Surface |
|
|
|
|
| |
|
|
|
|
|
|
| Wear hand protec- |
|
|
| DO NOT smoke |
|
|
|
| near fuel. | |
| tion. Use two handed. |
|
|
|
|
|
|
|
| ||
|
|
|
|
|
|
|
| Ignition | Ignition | ||
| Engine choke |
|
|
| |
|
|
|
| ON/OFF | |
| control. |
|
|
| |
|
|
|
|
| |
|
|
|
|
|
|
| Chain lubrication |
|
|
| Do not operate |
|
|
|
| without guards | |
|
|
|
|
| |
|
|
|
|
| in place. |
|
|
|
|
|
|
Symbol form/shape | Symbol | Symbol form/shape | Symbol | ||
description/application | description/application | ||||
|
|
|
|
|
|
|
|
| Carburetor adjustment |
| Carburetor adjustment |
|
|
| - Low speed mixture |
| - High speed mixture |
|
|
|
|
|
|
|
|
| Safety/Alert |
| Carburetor adjustment |
|
|
|
|
| - Idle speed |
|
|
|
|
|
|
|
|
| Avoid all power |
| Do not operate clos- |
|
|
| lines. This unit is not |
| er than 15 M (50 ft.) |
|
|
| insulated against |
| from electrical haz- |
|
|
| electrical current. |
| ards. |
|
|
|
|
|
|
|
|
| Plan retreat path |
| Primer bulb |
|
|
|
|
| |
|
|
| from falling |
|
|
|
|
| objects. |
|
|
|
|
|
|
|
|
|
|
| DO NOT allow |
| Wear slip resistant |
|
|
|
| ||
|
|
|
| ||
|
|
| flames or sparks |
| foot wear. |
|
|
| near fuel. |
|
|
|
|
|
|
|
|
|
|
|
| Keep bystanders at least | |
|
|
|
| 4.5 meters (15 feet) away. | |
|
|
|
|
|
|
Before operation a complete check of the unit must be performed;
•Check unit for loose/missing nuts, bolts and screws. Tighten and/or replace as needed.
•Inspect fuel lines, tank and area around carburetor for fuel leaks. DO NOT operate unit if leaks are found.
•Never adjust blades when the engine is operating.
•Inspect hand guard for damage. Replace if damaged or missing.
•Check that the blade assembly is firmly attached and in safe operating condition. Dull, loose or damaged blades should not be used.
•ECHO, INC. will not be responsible for the failure of cutting devices or accessories which have not been tested and approved by ECHO for use with this unit.