SPRAYER COMPONENTS & USE INFORMATION, Continued
3 STAGE FILTERING SYSTEM
This backpack sprayer is equipped with a 3 stage fltering system (see fgure
1). Stage 1 is a flter basket incorporated into the tank opening where fuid is added. Stage 2 flter is located at the inlet of the pressure cylinder. Stage 2 is a removable
component wear.
The stage 3 flter is a removable flter incorporated into the inlet side of the
Make sure pressure is released before detaching the hose from the
Figure 1 | Stage 1 | ||
|
| (Filter | |
| basket) | ||
|
|
| |
Stage 2 |
|
| |
Pressure | |||
(Removable | |||
Cylinder | |||
|
| ||
|
|
|
Figure 2 Stage 2 (removable In-Tank filter)
Stage 3 (removable
Guide edge facing away from | Guide edge on pressure |
pressure cylinder | cylinder |
FILLING THE SPRAYER
Make sure the flter basket is in place to keep debris from entering the tank.
Determine the amount of mixture needed for your application. Add the proper amount of water to the tank. Add the proper amount of chemical to the tank (check the chemical label for proper ratio of chemical). Stir mixture in tank with a clean utensil (like a paint stirrer). The tank will hold the
It is not necessary to completely fll the sprayer tank with each use. You can fll the tank with only the amount needed for each application.
Always follow the manufacturer’s instructions included on their product label.
5E