SPRAYER COMPONENTS & USE INFORMATION, Continued

HELPFUL SPRAYING INFORMATION

Use RAPID pump strokes to prime the pump. You will know the pressure chamber is filling with liquid when you feel firm resistance from the pump. The air in the pressure chamber is compressed from repeated strokes. By pressing the hand lever on the shut-off, the valve opens. For safety lock-off feature (no-spraying), pull up on handle and move red locking mechanism into lock-off position as shown in fg.

1.To disengage, pull up on handle and return red locking mechanism to neutral position as in fg. 3. For lock-on feature (continuous spraying), push down on handle and move red locking mechanism into lock- on position as shown in fg. 2. To disengage, push down on handle and return red locking mechanism to neutral position as shown in fg. 3.

In the event that the handle becomes stuck in the lock-on (continuous spraying) position and the tank pressure needs to be relieved, carefully open the tank and place the wand inside the tank until the pressure is relieved.

LOCK-OFF POSITION

LOCK-ON POSITION

NEUTRAL POSITION

Locking Mechanism

Handle Down

Handle

Up

Figure 1

Figure 2

Figure 3

For easy pump action use the END of the pump handle. The amount of liquid delivered during spraying depends on the rate of pump stroke. The fan nozzle tip is rated at .4 gpm at 40psi. This is the nominal operating pressure of the sprayer.

Note: If you experience a rapid drop in pressure, drain the sprayer completely and pump the handle with an empty tank. The pressure chamber will fill with the required volume of air to repressurize. Perform this procedure from time to time as routine maintenance.

POWDER-BASED CHEMICALS

Powder-based chemicals (powder mixed with liquids to make the spraying agent) are usually abrasive and can cause wear. When you use a powder-based chemical in your sprayer, make sure it is thoroughly dissolved in the liquid solution. Thoroughly clean and flush the sprayer with water to extend the life of the sprayers parts.

CLEANING

1)Always empty the sprayer and clean the tank thoroughly after each use.

2)Pump the sprayer handle until all of the contents and air exit through the nozzle (minimum of 30 strokes).

3)Fill tank half way with water and pump the water out as explained in step 2 (repeat several times as necessary).

Other Cleaning Hints:

•Improper spray distribution usually means the nozzle is clogged, remove the nozzle and clean it.

•Soap can be added to the water to clean the tank.

•Do not use strong cleaning agents or abrasives.

•If you use a chemical agent to clean the tank follow the manufacturer’s recommendations for the disposal of the waste water.

•Follow the chemical manufacturers instructions for clean up.

6E

Page 6 Page 8
Page 7
Image 7
Echo MS-41BP manual Helpful Spraying Information, POWDER-BASED Chemicals, Cleaning
Page 6 Page 8

MS-41BP specifications

The Echo MS-41BP is a powerful and versatile brushless engine chainsaw designed for both professional and residential use. This cutting-edge tool combines robust performance with user-friendly features that cater to both novice and experienced users.

One of the standout features of the MS-41BP is its 41cc engine, which provides a strong output for cutting through various types of wood. The brushless motor technology in this chainsaw enhances efficiency, providing longer run times and requiring less maintenance compared to traditional brushed motors. This makes the MS-41BP not only a reliable option but also a cost-effective one in the long run.

The chainsaw is equipped with a lightweight design that makes it easy to maneuver for extended periods without causing fatigue. Weighing in at just over 10 pounds, the MS-41BP is designed for comfort and reduced vibration, ensuring that users can maintain precision during operation.

Another significant technological advancement is the automatic lubrication system, which keeps the chain and bar adequately lubricated. This feature not only extends the life of the chainsaw but also ensures smoother operation and improved cutting performance. Users can also easily adjust the chain tension, allowing for hassle-free maintenance.

Safety is a top priority with the Echo MS-41BP. It includes an inertia-activated chain brake, which stops the chain in case of kickback, significantly reducing the risk of accidents. The chainsaw also features a protective guard for the front hand, adding another layer of security during use.

The ergonomic handle is designed to enhance grip and control, making it ideal for various cutting tasks, from felling trees to trimming branches. The MS-41BP's low emission engine meets stringent environmental standards, making it a more eco-friendly choice for environmentally conscious users.

In summary, the Echo MS-41BP blends performance, safety, and convenience in one package. Its powerful 41cc brushless engine, user-friendly design, automatic lubrication system, and focus on safety make it a strong contender for anyone in need of a reliable chainsaw. Whether you're a seasoned professional or a weekend warrior, the Echo MS-41BP stands out as a top choice for all your cutting needs.
Top Page Image Contents