Echo PB-230LN Install Blower Pipes, Fuel Requirements, ASSEMBLY, BLOWER APPLICATION, PRE-OPERATION

12

ASSEMBLY

WARNING DANGER

Never perform maintenance or assembly procedures with engine running or serious personal injury may result.

BLOWER APPLICATION

Install Blower Pipes

1.Align grooves in straight pipe with pegs on blower housing and slide pipe onto housing.

2.Turn straight pipe clockwise to lock into place.

3.Align grooves in fan head nozzle with pegs on straight pipe and slide fan head nozzle onto straight pipe.

4.Turn fan head nozzle clockwise to lock into place.

PRE-OPERATION

FUEL

Fuel Requirements

Gasoline - Use 89 Octane [R +2 M ] (mid grade or higher) gasoline known to be good quality. Gasoline may contain up to 15% MTBE (methyl tertiary-butyl ether). Gasohol containing methyl (wood) alcohol is NOT approved.

Two Stroke Oil - A two-stroke engine oil meeting ISO-L-EGD (ISO/CD 13738) and J.A.S.O. FC Standards, must be used. Echo brand Premium 50:1 oil meets these standards. Engine problems due to inadequate lubrication caused by failure to use an ISO-L-EGD and J.A.S.O. FC certified oil, such as Echo Premium 50:1 Two-stroke Oil, will void the two-stroke engine warranty. (Emission related parts only are covered for two years, regardless of two-stroke oil used, per the statement listed in the EPA Phase II Emission Defect Warranty Explanation.)

IMPORTANT

Echo Premium 2-Stroke Oil may be mixed at 50:1 ratio for application in all Echo engines sold in the past regardless of ratio specified in those manuals.