14

OPERATION

•Provide all operators of this equipment with the Operator's Manual and instructions for safe operation.

•Before starting the unit, equip yourself and any other person working within the 15 m (50 ft.) Safety Zone with the required Protective Equipment and clothing.

•Do not operate this product indoors or in inadequately ventilated areas.

15m

(50 ft.)

STARTING COLD ENGINE

1.Stop Switch - Start/Run.

Move stop switch button (A) away from the STOP position.

2.Move throttle position lever (B) midway between idle and full throttle positions.

3.Close Choke - Cold Start.

Move choke (C) to "Cold Start" Position.

4.Purge Bulb -Pump.

Pump primer bulb (C) until fuel is visible and flows freely in the clear fuel tank return line. Pump bulb an additional 4 or 5 times.

IMPORTANT

Recoil starter: Use short pulls - only 1/2-2/3 of rope for starting. Do not allow the rope to snap back in. Always hold the unit firmly.

A

B

C

D