MAINTENANCE

PB-250LN

 

 

1.Start engine, run at idle for one minute.

2.Complete warm up by running at full throttle for 5 minutes, operating choke twice to clear air from carburetor chambers.

3.Check idle speed and reset if necessary. If a tachometer is available, idle speed screw (A) should be set to the specifications found on "Specifications" Page of this manual. Turn idle screw (A) clockwise to increase idle speed; counter clockwise to decrease idle speed.

A

24

X7501183303

© 3/2013 ECHO Inc.

Page 24
Image 24
Echo PB-250LN specifications Start engine, run at idle for one minute