Echo PB-250LN Stopping Engine, Operating Blower, Recoil Starter, Stop Switch, Operation

Models: PB-250LN

1 32
Download 32 pages 36.52 Kb
Page 17
Image 17
4.Recoil Starter

PB-250LN

OPERATION

 

 

4.Recoil Starter

Place the unit on a flat, clear area. Firmly grasp throttle grip with left hand and rapidly pull recoil starter handle/rope (E) until engine fires.

Recoil starter: Use short pulls - only 1/2 ~ 2/3 of rope for starting. Do not allow the rope to snap back in. Always hold the unit firmly.

Note: If engine does not start after 5 pulls, use Cold Start Procedure.

E

Stopping Engine

1.Throttle Trigger/Throttle Position Lever

Release throttle trigger (F). Move throttle position lever (B) forward to idle position and allow engine to return to idle before shutting off engine.

2.Stop Switch

Move stop switch (A) to STOP position.

A

B

F

If engine does not stop when stop switch is moved to STOP position, close choke - COLD START position - to stall engine. Have your ECHO dealer repair stop switch before using blower again.

Operating Blower

Engine exhaust IS HOT, and contains Carbon Monoxide (CO), a poison gas. Breathing CO can cause unconsciousness, serious injury, or death. Exhaust can cause serious burns. ALWAYS position unit so that exhaust is directed away from your face and body.

Always wear safety glasses, hearing protection and a face filter mask or serious personal injury may result. Do not point the blower pipe in the direction of people or pets.

A

B

F

X7501183303

17

© 3/2013 ECHO Inc.

Page 17
Image 17
Echo PB-250LN Stopping Engine, Operating Blower, Recoil Starter, Throttle Trigger/Throttle Position Lever, Stop Switch