POWER BLOWER 15

OPERATOR'S MANUAL

AIR FILTER

Level1.

Tools required: 25-50 mm (1-2 in.) Cleaning brush.

Parts required: Airfilter

NOTE

Cleandaily.

1.Close choke (Cold Start Position []). This prevents dirt from

entering the carburetor throat when the air filter is removed. Brush accumulated dirt from air cleaner area.

2. Remove air filter cover. Brush dirt from inside cover.

3. Remove air filter and lightly brush debris from filter. Replace filter if it is damaged, fuel soaked, very dirty, or the rubber sealing edges are deformed.

4. If filter can be reused, be certain it:

• Fits tightly in the air filter cavity.

• Is installed with the original side out.

5.Install air filter cover.

FUEL FILTER

Level1.

Tools required: 200-250mm(8-10in.)lengthofwire with one end bent into a hook. Clean rag, funnel, and an approved fuel container.

Parts required: Fuel line and filter

DANGER

Fuel is VERYflammable. Use extreme care when mixing, storing or handling.

1. Use a clean rag to remove loose dirt from around fuel cap and empty fuel tank.

2. Use the “fuel line hook” to pull the fuel line and filter from the tank.

3. Remove the filter from the line and install the new filter.