8
1.
2.STOP SWITCH - "SLIDE SWITCH" mounted on top of handle. Push forward to start and run. Slide back to stop.
3.SPARK PLUG - Provides spark to ignite fuel mixture.
4.
5.
6.FUEL TANK CAP - Covers and seals fuel tank.
7.RECOIL STARTER HANDLE- Pull recoil handle slowly until recoil starter engages, then quickly and firmly. When engine starts, return handle slowly. DO NOT let handle snap back or damage to unit will occur.
8.
9.CHOKE - Choke is located on top of the air cleaner. Move choke lever to "COLD START" ( ) to close choke for cold starting. Move choke lever to "RUN" ( ) position to open choke.
10.PURGE BULB - Pumping purge bulb before starting engine draws fresh fuel from the fuel tank, purging air from the carburetor. Pump purge bulb until fuel is visible and flows freely in the clear fuel tank return line. Pump purge bulb an additional 4 or 5 times..
11.
12.
13.THROTTLE TRIGGER - Spring loaded to return to idle when released. During acceleration, press trigger gradually for best operating technique.
14.
1 - Power Head
1 | - | BlowerPipe(main) |
1 | - | BlowerPipe |
1 | - | Operator's Manual |
1 | - | Warranty Registration Card |
1 | - ECHO Emissions and Warranty Statement |
Power Blower
Operator's Manual
MODEL
WARNING
Read rules for safeoperationandinstructions carefully. ECHOprovidesthisOperator's Manual, which must be read and understood for proper and safe operation.
1 - Echo Power Blend TM |
X753118
X75300
09/06