POWER BLOWER

9

OPERATOR'S MANUAL

ASSEMBLY

WARNING

Never perform maintenance or assembly procedures with engine running or serious personal injury may result.

INSTALL BLOWER PIPES

1.Stand unit upright on blower base.

2.Release locking ring (C) with a coin or screwdriver, and rotate so that lock symbol (A) is at top of ring.

3.Align locking ribs (E) on upper blower pipe with recesses (D) in locking ring, and slide upper blower pipe into locking ring.

4.After inserting upper blower pipe into fan case so that line (F) meets locking ring (C), rotate locking ring clockwise 1/8 turn to lock upper blower pipe in place.

5.Align tabs (H) with grooves (G) and slide lower blower pipe over upper pipe until there is light resistance.

6.Assemble straight pipe onto upper pipe until you feel light resistance. Do not force connection. Hold upper pipe, and turn lower pipe counterclockwise, engaging positive locking channels until connection is firm. Do not force connection.

NOTE

Blower use will eventually loosen pipe connections. Exclusive positive locking system allows pipes to be tightened. If loosening occurs, remove lower straight pipe, and install according to instructions 5 & 6.

blower pipe (main)

blower pipe

blower pipe (main)