8
1.SAFETY DECAL - Lists important safety precautions.
2.STOP SWITCH - "SLIDE SWITCH" mounted on top of handle. Push forward to start and run. Slide back to stop.
3.SPARK PLUG - Provides spark to ignite fuel mixture.
4.SAFETY DECAL - Lists important safety precautions.
5.SAFETY DECAL - Lists important safety precautions.
6.FUEL TANK CAP - Covers and seals fuel tank.
7.RECOIL STARTER HANDLE - Pull recoil handle slowly until recoil starter engages, then quickly and firmly.
When engine starts, return handle slowly. DO NOT let handle snap back or damage to unit will occur.
8.Spark arrestor muffler or spark arrestor muffler with catalyst
9.CHOKE - Choke is located on top of the air cleaner. Move choke lever to "COLD START" ( 
) to close choke for cold starting. Move choke lever to "RUN" ( 
) position to open choke.
10.PURGE BULB - Pumping purge bulb before starting engine draws fresh fuel from the fuel tank, purging air from the carburetor. Pump purge bulb until fuel is visible and flows freely in the clear fuel tank return line. Pump purge bulb an additional 4 or 5 times..
11.BLOWER PIPES - Exclusive positive locking system.
12.THROTTLE POSITION LEVER - Pull back to increase engine speed. Friction washers maintain throttle lever setting.
13. THROTTLE TRIGGER - Spring loaded to return to idle when released. During acceleration, press trigger gradually for best operating technique.
14. AIR CLEANER - Contains replaceable air filter element.
15. LOCKING RING - Locks blower pipe.
1 - Power Head
1 - Blower Pipe (main)
1 - Blower Pipe
1 - Operator's Manual
1 - Warranty Registration Card
1 - Echo Power Blend X TM
Power Blower
Operator's Manual
MODEL
WARNING
Read rules for safeoperationandinstructions carefully. ECHOprovidesthisOperator's Manual, which must be read and understood for proper and safe operation.
X7531180000 | X753002680 |
08/06 |