Power Blower

9

Operator's Manual

Assembly

WARNING

Never perform maintenance or assembly procedures with engine running or serious personal injury may result.

blower application

Install Blower Pipes

1.Stand unit upright on blower base.

2.Release locking ring (C) with a coin or screwdriver, and rotate so that lock symbol (A) is at top of ring.

3.Align locking ribs (E) on mian blower pipe with recesses (D) in locking ring, and slide mian blower pipe into locking ring.

4.After inserting main blower pipe into fan case so that line (F) meets locking ring (C), rotate locking ring clockwise 1/8 turn to lock mian blower pipe in place.

5.Align groove (H) in fan-head pipe with tabs (G), and slide fan- head pipe over main pipe until there is light resistance. Do not force connection.

6.Hold main pipe, and turn fan-head pipe clockwise, engaging posi- tive locking channels until connection is firm.

NOTE

Blower use will eventually loosen pipe connections. Exclusive positive locking system allows pipes to be tightened. If loosening occurs, remove fan-head pipe, and install according to instructions 5 & 6.

blower pipe (main)

G

H

blower pipe (main)

blower pipe