Echo PB-265LN specifications Stopping Engine, Operating Blower, Operation

Models: PB-265LN

1 32
Download 32 pages 60.63 Kb
Page 16
Image 16
Stopping Engine

OPERATION

PB-265LN

 

 

2.Purge Bulb

Pump purge bulb (C) until fuel is visible and flows freely in the clear fuel tank return line.

3.Recoil Starter

Pull recoil starter handle (D) and engine should start.

Note: If engine does not start after 5 pulls, use Cold Start Procedure.

Stopping Engine

1.Throttle Position Lever

Move throttle position lever (A) to START/IDLE DETENT position ( ) and allow engine to return to idle before shutting off engine.

2.Stop Switch

Move stop switch (A) toIf engine does not stop when stop switch is moved to STOP position, close choke - COLD START position - to stall engine. Have your ECHO dealer repair stop switch before using trimmer again.(STOP) position.

Operating Blower C

D

A

If engine does not stop when stop switch is moved to STOP position, close choke - COLD START position - to stall engine. Have your ECHO dealer repair stop switch before using trimmer again.

Operating Blower

Engine exhaust IS HOT, and contains Carbon Monoxide (CO), a poison gas. Breathing CO can cause unconsciousness, serious injury, or death. Exhaust can cause serious burns. ALWAYS position unit so that exhaust is directed away from your face and body.

Always wear safety glasses, hearing protection and a face filter mask or serious personal injury may result. Do not point the blower pipe in the direction of people or pets.

16

X7501183702

© 03/2013 ECHO Inc.

Page 16
Image 16
Echo PB-265LN specifications Stopping Engine, Operating Blower, Operation