CRUISE CONTROL KIT INSTALLATION INSTRUCTIONS

OPERATION

NOTE

These operating instructions modify the instructions in your current PB-413T/PB-620 Operator’s Manual. Please retain for future refer- ence.

DESCRIPTION

Replaces “Stop Switch” description in Operator’s Manual:

Combination Throttle Position/Stop Switch Button - Controls engine speed and turns ignition on or off. Forward position - STOP. First position - IDLE. Move button back to increase speed, forward to decrease speed. Use Throttle Position Button to set and hold blower speed for continuous operation.

IMPORTANT

“STOP” position of 9001014 Stop Switch Button is all the way forward. (“STOP” position of old handle button was all the way back).

Replaces “Throttle Trigger” description in Operator’s Manual:

Throttle Trigger - Spring-loaded trigger controls engine speed for intermittent operation. When trigger is released, blower returns to idle, or to speed set by Throttle Position/Stop Switch Button.

STARTING COLD ENGINE

PB-413T/PB-620

1.Replaces Step 1 in Operator’s Manual: ThrottlePosition/StopSwitchButton

Slide Throttle Position/Stop Switch Button (A) all the way back to WOT (Wide Open Throttle) position (first position away from STOP position.)

2.Follow remaining cold engine starting instructions in Operator’s Manual.

12

13

A

6