Echo PB-620 Replaces Steps 1 & 2 of “Stopping Engine” in Operator’s Manual:, This information applies to “Operating Blower” section of Operator’s Manual:, NOTE

CRUISE CONTROL KIT INSTALLATION INSTRUCTIONS

STARTING WARM ENGINE

PB-413T/PB-620

1.Replaces Step 1 in Operator’s Manual: Throttle Position/Stop Switch Button

Slide Throttle Position/Stop Switch Button (A) back to idle position (first position away from STOP position.)

2.Follow remaining warm engine starting instructions in Operator’s Manual.

STOPPING ENGINE

PB-413T/PB-620

Replaces Steps 1 & 2 of “Stopping Engine” in Operator’s Manual:

1.Trigger-ThrottlePosition/StopSwitchButton

Release throttle trigger if depressed. Move Throttle Position /Stop Switch Button (A) forward to IDLE position and allow engine to return to idle for 30 seconds before shutting off.

2.ThrottlePosition/StopSwitchButton

Move throttle Position/Stop Switch Button (A) all the way forward to STOP position.

OPERATING BLOWER

This information applies to “Operating Blower” section of Operator’s Manual:

Throttle Trigger Operation - Place Throttle Position/Stop Switch Button in “IDLE” position, and control blower speed with throttle trigger. Release trigger and allow unit to idle when blower action is not needed.

NOTE

When trigger is released, blower returns to speed set by Throttle Position/Stop Switch Button.

Throttle Position/Stop Switch Button Operation - Control and set blower speed by sliding button to desired speed. Slide button to “IDLE” position when blower action is not needed.

Read and obey all blower operating and safety instructions in Operator’s Manual.