14

starting warm engine

The starting procedure is the same as Cold Start except DO NOT close the choke, and do not depress throttle trigger to wide open position.

warning

 

The attachment should not move at idle, otherwise serious personal

 

injury may result.

 

NOTE

 

If attachment moves, readjust carburetor according to “Carburetor

 

Adjustment” instructions in this manual or see your ECHO Dealer.

A

 

1.Stop Switch

Move stop switch button (A) away from the STOP position.

2.Purge Bulb

Pump purge bulb (C) until fuel is visible in the "Clear" fuel return line. Pump bulb an additional 4 or 5 times.

3. Recoil Starter

C

 

Lay the unit on a flat area and keep movable attachment parts clear

of all obstacles. Rapidly pull recoil starter handle/rope (D) until

engine fires.

NOTE

If engine does not start after 5 pulls, use Cold Start Procedure.

D

stopping engine

1.Throttle

Release throttle and allow engine to return to idle before shutting off engine.

2. Stop Switch

A

 

Move stop switch button (A) backward to STOP position.

 

warning

If engine does not stop when stop switch is moved to STOP posi- tion, close choke - COLD START position - to stall engine. Have your ECHO dealer repair stop switch before using edger again.