Power Edger

9

Operator's Manual

 

 

 

Contents

The ECHO product you purchased has been factory pre-assembled for your convenience. Due to packaging restrictions, shield installation and other assembly may be necessary.

After opening the carton, check for damage. Immediately notify your retailer or ECHO Dealer of damaged or missing parts. Use the contents list to check for missing parts.

___ 1, Edger Assembly

___ 1, Power Head

___ 1, Drive Shaft Assembly

___ 1, Plastic Bag (Co-Pack)

___ 1, Operator's Manual

___ 1, Safety Manual

___ 1, Warranty Registration Card

___ 1, Echo Power BlendX TM 2-stroke oil sample

___ 1, Front Handle

___ 1, Lower Bracket, Front Handle

___ 4, 5 x 35 mm screws

___ 4, 5 mm nuts*

___ 1, T-Wrench

___ 2, split pin

___ 1, 4 mm Hexagon Wrench

___ 1, Locking Tool

___ 1, 8 x 10 mm Spanner Wrench

___ Safety Glasses

* 5mm nuts may not be needed.

Assemblydrive shaft/power head

Tools Required: 4 mm Hex Wrench

Parts Required: Power Head, Drive Shaft Assembly

1.Loosen, the bolt (A) at engine drive shaft clamp.

2.Carefully fit drive shaft assembly to engine making sure that inner drive shaft engages into clutch mount.

NOTE

Lower gear housing and head assembly must be in line with the engine.

3.Turn drive shaft housing so that center line of housing is midway between the two arrows on shaft.

4.Tighten bolt (A).

A

A