
24
2.Remove split pin (A).
3. Rotate blade until holes in inner blade adapter (B) and gear box |
| B |
| C | |
align. Insert locking tool to lock PTO shaft (C). |
| |
|
|
|
NOTE |
| F |
Blade nut (D) is left hand thread. |
| |
|
| |
|
| E |
4. Remove blade nut (D) in a clockwise direction using |
| |
| D | |
Remove outer blade adapter (E), blade (F) and inner blade adapter |
| |
| A | |
(B). |
| |
|
| |
|
|
|
5.Clean all loose debris from gear box.
6.Remove plug (G) and check level of grease. Grease should fill gear case to bottom of grease plug hole.
7.Add grease if necessary using manual grease gun or
8.Install inner blade adapter (B) onto PTO shaft (C).
9.Install and center new blade (F) onto inner adapter (B).
10.Install outer adapter (E) and nut (D). Tighten nut (D) firmly, counterclockwise (CCW).
IMPORTANT
Never reuse old split pin.
11. Install new split pin (A) to secure nut.