ASSEMBLY

ASSEMBLY

WARNING

Move STOP switch to STOP position and disconnect spark plug lead at spark plug before assembling unit. Do not connect spark plug lead to spark plug until unit is properly assembled, checked, and ready for use.

ALWAYS wear eye protection that meets current ANSI Z87.1 requirements. Operators that wear prescription glasses must wear appropriate protective eyewear over glasses. For additional safety, a full-face shield may be worn over the safety eyewear to provide complete face protection.

If parts are missing, or if you have a problem installing parts, contact your Echo Dealer for assistance or call Echo Consumer Product Support at 1-800-673-1558. For the Dealer nearest you ask your retailer or call

1-800-432-3246, or visit our website at www.echo- usa.com

DANGER

Metal grass, weed, brush, and clearing blade edges are extremely sharp. Accidental hand or body contact with blade edges can result in severe cuts, even if the engine is off and blades are not moving. Always wear sturdy work gloves when handling blades. Do not allow blades to contact any part of your body. Work gloves do not provide protection from contact with moving blades. Always keeps hands and body away from moving blades.

NEVER fuel, start, or operate your unit unless it is fully assembled, all shields and required guards are in place, and the throttle lock-out lever and trigger are working properly.

Spark

Spark

Plug

Plug

Wire

 

12