Hedge Clipper

9

Operator's Manual

Contents

The ECHO product you have purchased has been factory pre-assembled for your convenience.

After opening the carton, check for damage. Immediately notify your retailer or ECHO Dealer of damaged or missing parts. Use the contents list to check for missing parts.

____ 1 - Power Head/Driveshaft/Hedge Clipper Assembly

____ 1 - Operator's Manual

____ 1 - Hedge Clipper Safety Manual

____ 1 - Warranty Registration Card

____ 1 - Torx T27 L-Wrench (225 Model Only)

____ 1 - Blade Cover

Assembly

225 Model Only

Tools Required: Torx T27 L-Wrench

Parts Required: Drive Shaft Assembly and Gear Housing Assembly.

gear housing assembly / drive shaft

NOTE

Hedge Clipper Blades are very sharp. Wear gloves to protect hands.

1.Remove locating bolt (A) and loosen clamping bolt (B).

2.Remove vinyl cap from drive shaft.

3.Slide Gear Housing Assembly onto Drive Shaft. Be certain the Flex Drive Shaft engages the hole in Driver Gear.

IMPORTANT

Flat edge of washer (C) must be against drive shaft.

4.Align locating hole in gear housing with locator hole in drive shaft.

5.Install locating bolt (A). Tighten clamping bolt (B).

A

B C