Hedge Clipper 21

Operator's Manual

lubrication

Blades

Level 1.

Tools Required: Clean rag, cleaning brush, oil can

Parts Required: 20W Engine Oil (lubrication), 50-50 mixture of kerosene and 20W oil (cleaning)

WARNING

Hedge Clipper blades are very sharp. Touching them may lead to severe personal injury. Avoid touching blades whenever possible, and always wear gloves to protect hands.

1.Brush loose debris from blade and coat both sides of blade with the 50-50 cleaning mixture.

2.Allow cleaning mixture to soften the remaining gummy residue then wipe it from the blade.

3.Apply clean oil to the entire length of the blade. Be certain the blade bolts are lubricated.

4.Wipe excess oil from the blade before putting the unit back in ser- vice.

Gear Case

Level 2.

Tools required: Grease gun with Lithium Grease, clean rag

Parts required: POWER BLENDXTM 14 oz. cartridge or Lithium

Based Grease

1.Clean dirt from grease fitting (A).

2.Carefully pump grease in fitting (A). DO NOT force grease. Too much pressure will force grease past seals and cause damage.

Apply 1-2 pumps of grease every 15-25 hours of operation.

A