Hedge Clipper 23 Operator's Manual

1.Disconnect spark plug wire from spark plug.

2.Slide blades to allow file clearance using slots (A) on bottom of blades. Do not pry against cutting edges.

3.Follow the original shape, and file each cutting edge carefully to avoid damage to adjacent teeth. Maintain 6 mm (.25 in.) radius at base of each tooth.

IMPORTANT

If a power grinder is used, DO NOT allow blade to over heat.

4.Lubricate blades. See "Lubrication".

5.Connect spark plug wire.

AA

blade adjustment

Level 2.

Tools Required: 8 mm Socket & Extension, 4mm Hex Wrench w/ extension

1.Move stop switch to STOP position.

2.Disconnect spark plug wire.

WARNING

Hedge clipper blades are very sharp. Touching them may lead to

severe personal injury. Use long hex wrenches and sockets with

 

 

A

extensions when tightening blade screws and blade locknuts to keep

B

 

 

 

hands at a safe distance from sharp blades.

 

 

 

 

 

 

3.Tighten blade screws (A) securely.

4.Hold blade screws (A) to prevent turning, and tighten locknuts (B).

A

B