14

4.Secure ignition leads against engine housing with clip (F).

5.Install air filter and cover.

F

balance and adjust unit

1.Loosen harness clamp screw.

2.Put on harness and attach unit to harness.

3.Slide harness clamp up (A) or down until unit balances with head

 

approximately 50-75 mm (2 -3 in.) from the ground.

B

 

 

4.

Tighten harness clamp screw.

 

5.

Loosen upper U-Handle clamp screws (B), and position U-Handle

 

 

for comfortable operation.

A

 

 

6.Tighten U-Handle clamp screws and 8 mm clamp bolt securely.

Operation

WARNING

Moving parts can amputate fingers or cause severe injuries. Keep hands, clothing and loose objects away from all openings. Always stop engine, disconnect spark plug, and make sure all moving parts have come to a complete stop before removing obstructions, clearing debris, or servicing unit. Allow unit to cool before performing service. Wear gloves to protect hands from sharp edges and hot surfaces.

WARNING

Engine exhaust IS HOT, and contains Carbon Monoxide (CO), a poison gas. Breathing CO can cause unconscious- ness, serious injury, or death. Exhaust can cause serious burns. ALWAYS position unit so that exhaust is directed away from your face and body.