Echo SRM-266/S specifications Operation With Blades

OPERATION SRM-266/S

OPERATION

Moving parts can amputate fingers or cause severe injuries. Keep hands, clothing and loose objects away from all openings. Always stop engine, disconnect spark plug, and make sure all moving parts have come to a complete stop before removing obstructions, clearing debris, or servicing unit.

Engine exhaust IS HOT, and contains Carbon Monoxide (CO), a poison gas. Breathing CO can cause unconsciousness, serious injury, or death. Exhaust can cause serious burns. ALWAYS position unit so that exhaust is directed away from your face and body.

Operation of this equipment may create sparks that can start fires. This unit is equipped with a spark arrestor to prevent discharge of hot particles from the engine. Metal cutters can also create sparks if the cutter strikes rocks, metal, or other hard objects. Contact local fire authorities for laws or regulations regarding fire prevention requirements.

Operation With Blades

Blade use DEMANDS specific Brush Cutter configuration. Operation without specified shield, barrier bar or U-handle, and harness can result in serious personal injury. Follow installation instructions.

TO USE	Pro Maxi-Cut		Rigid Plastic
THESE	Grass/Weed		Tri-Cut	Metal Blade
BLADES	Blade		Grass/Weed Blade
	Support Handle, w/or	U-Handle or Support		U-Handle or Support
	w/o Barrier Bar		Handle	Handle
			w/Barrier Bar	w/Barrier Bar
You	Plastic Shield		Plastic Shield	Metal Shield
	Harness		Harness	Harness
must
install	Upper Plate &		Upper Plate	Upper/Lower
these	Flat Washer		& Glide Cup	Blade Plates
parts!
	Hex Nut		Hex Nut	Hex Nut
	New Cotter Pin		New Cotter Pin	New Cotter Pin

DO NOT INSTALL BLADES ON GT (CURVED SHAFT) MODEL TRIMMERS.

•Arbor Diameter of Upper Blade Plate must match arbor diameter of blades.

•New cotter pin required each time blade is installed.

•Brush cutters over 7.5 kg (16.5 lbs.) dry weight (weight w/o fuel) require a double shoulder harness.

16 X7502026004

© 9/2014 ECHO Inc.