Grass Trimmer/Brush Cutter 13 Operator's Manual
6.Secure the right hand
7.Adjust handles for comfortable operation and tighten handle as- sembling bolt (E) and 4 right handle assembling bolts (H).
8.Route throttle linkage and ignition lead assembly along shaft and clip as shown.
H
E
balance and adjust unit
1.Loosen harness clamp screw.
2.Put on harness and attach unit to harness.
3.Slide harness clamp up (A) or down until unit balances with head approximately
4.Tighten harness clamp screw.
5.Loosen upper
6.Tighten
B
A