GRASS TRIMMER/BRUSH CUTTER 21 OPERATOR'S MANUAL
STARTING WARM ENGINE
1.Press the decompression device (E).
2.Stop Switch
Move stop switch (A) forward away from the STOP position.
3.Purge Bulb
Pump purge bulb (C) until fuel is visible in the "Clear" fuel return line.
E
A
4.Recoil Starter
Lay the unit on a flat area and keep movable attachment parts clear of all obstacles. Hold unit firmly and rapidly pull the recoil starter handle (D) until the engine fires.
NOTE
If engine does not start after 5 pulls, use Cold Start Procedure.
CD
D
STOPPING ENGINE
1.Release throttle trigger and allow to run at an idle speed.
2.Slide ignition switch to “STOP” position.
