GRASS TRIMMER/BRUSH CUTTER 15 OPERATOR'S MANUAL
2.REPLACING SPOOL
NOTE
Keep line tight on spool.
A.Snap spool into housing while pulling line through eyelets with about 15 cm (6 in) extending out.
CAUTION
Knob tightens counterclockwise, “left”.
B. Fasten spool to housing with shaft bolt, spring, and knob.
OPERATING INSTRUCTIONS NYLON LINE
1.Always use the end of the line for cutting. Forcing the cutter head too close to the work will result in reduced efficiency and broken line.
2.Maintain the line at the recommended length of 12.5 to 15 cm (5 to 6 in). A longer line will reduce engine speed, a shorter line may result in engine damage.
3.The trimmer head rotates counterclockwise. Always cut with the head tilted to the right to deflect debris away from the operator.
4.Always observe the SAFETY RULES on Page 3 when using the unit.
Housing
Bolt
Spring
Knob
