14 
OPERATION
NOTE
Refer to your Pro Attachment Series power source or Split Boom Operator's Manual for correct engine fueling, starting and stopping instructions.
PRUNING TECHNIQUES
The Power Pruner™ Attachment is designed for light to medium trimming of limbs and branches up to 203 mm (8 in.) in diameter. Follow these tips for successful operation.
•Plan cut carefully. Check direction branch will fall.
•Long branches should be removed in several pieces.
•Do not stand directly beneath branch being cut.
•When ready to cut:
Hold "cutting shoe" against branch. This will prevent whipping of the branch. DO NOT use back and forth sawing action.
•Look out for branches immediately behind the branch being cut. If saw chain hits rear branch damage to the saw chain my occur.
•Accelerate to full throttle.
•Apply cutting pressure.
•Ease cutting pressure when nearing end of cut to maintain control.
•When pruning a limb 102 mm (4 in.) diameter or larger cut as follows:
1.Under cut 1/4 limb diameter near tree trunk.
2.Finish top cut slightly farther out on limb.
3.Flush cut stub at trunk.
CORRECT
GUIDE AGAINST
BRANCH
NOT
CORRECT
BLADE HITS REAR BRANCH
• DO NOT use for felling or bucking.
NOT
CORRECT